Standard socket/base type LED load resistor.
High-quality nylon rope cable, tough, durable, and high temperature resistant, prolonging the service life of the decoder.
Effectively solves over-strobing and instrument panel information errors caused by turn signals, brake lights, and license plate lights.
Used for turn signals, tail parking lights, brake lights, daytime running lights, license plate lights, etc.
See the product socket picture to help confirm.
Please check whether the socket model matches before ordering to avoid invalid purchases!
Warning! Don't Touch By Hand Directly.
Load Resistors Heat Up Like Light Bulbs And Get HOT When Working.
Mount them on metal surfaces and keep them away from any plastic parts or wires.

Durable quality: With higher quality and longer life, premium resistors are the safest choice for adding a load balancer to your automotive lighting system, with 3x greater heat dissipation surface area than traditional resistors.
Heat Resistance: The most heat-resistant resistor on the market, operating at approximately 200° F when properly mounted to a metal surface, 100° F lower than traditional gold resistors.
Flexible installation: The length between the resistor and the wire harness is 36 inches, allowing the resistor to be mounted to a perfect metal flat spot, with a lower profile and approximately 1/3 flatter than traditional gold resistors, greatly reducing the chance of contact with any plastic parts.
Weatherproof Design: Weatherproof connectors are used between the resistors and the wiring harness, making them weatherproof.
Friendly design: Plug and play, easy to use.

Plug Type: 1157
Voltage: 9-6V
Current: 1.1A
output Power: 14W
Operating Temperature: -40°C~+85°C

1004 1016 1034 1076 1142 1154 1157 1157a 1157R 1158 1176 1178 1196 2057 2057A 2057R 2357 2357a 2357R 2397 3496 68 7225 7528 90 94

1157 Anti-Flicker Hyper Flash Decoders