HEADLIGHT HARDWARE INSTALLATION-RELATED ISSUES

H7 socket

1) Common problem:

  • If you encounter problems with loose installation, you need to install an adapter chuck.

2) Solution:

  • Please take some photos of the original car light H7 halogen light adapter chuckand send them to me. We help you check and provide a suitable adapter chuck.

  • If you don't have a picture of the original car, we can provide the model information and we will help you find the right adapter chuck.

  • It is recommended to buy in-line products, eg: Q20SE Q20 Q25 Q30 Q40 series

H13 socket(After installation, it cannot turn to the 3 o'clock-9 o'clock direction.)

  • AUXBEAM H13 socket has wired control and direct plug

Line control series include: F2 F15 F16P F22 GX series

Direct plug series include: Q20SE Q20 Q25 Q30 Q40 series

  • Things to note when installing:

Wire control H13:

1)  Buckle design: plastic buckle, no screws, can be removed by rotating.

2)  How do we distinguish the direction of high and low beams with dual headlight H13?

  • Lamp bead position: low beam at high place, high beam at ground level.
  • Orientation after installation: low beam lamp bead is on top, high beam lamp bead is on bottom.

  • The "locking point" on the buckle: with a long tail, on the side of the low beam lamp bead.
  • Outgoing line direction:

High beam outgoing: F2 F16P F22 GX

Low beam outgoing: F15

Direct plug H13:

  • Buckle design: Integrated with the lamp body fixed, 1:1 mold of the original halogen lamp.

  • Installation is consistent with the original car lights, insert, rotate, and lock, finish.

H4 socket (After installation, it cannot turn to the 3 o'clock-9 o'clock direction.)

  • AUXBEAM H4 socket has wired control and direct plug

Line control series include: F2 F15 F16P F22 GX Series

Direct plug series include: Q20SE Q20 Q25 Q30 Q40 Series

  • Things to note when installing:

Wire control H4:

1) Buckle design: The buckle on the light pole has no screws and can be removed by rotating it.

2) Installation method: fixed hole position.

3) The high and low beams are reversed, check the installation orientation after assembly, The light shielding plate should be facing downwards.

Direct plug H4:

  • Buckle design: Integrated with the lamp body fixed, 1:1 mold of the original halogen lamp.

  • Installation Method: Fixed hole position, can only be inserted in one direction.

Some common problems when changing LED lights:

  • If the original car dust cover cannot be replaced, it is recommended to replace the silicone dust cover.

  • Some special models do not have dust covers originally and need to be installed by yourself. eg: motorcycle, 4x4, etc.
  • If you don't want to replace the dust cover, you can choose the Auxbeam wire-controlled F15, F2, or in-line Q25, Q20 Q20-SE Q15 series.
AUXBEAM CUSTOMER SUPPORT

AUXBEAM Help Center

Your guide to better automotive lighting. Find product information, explore helpful resources, and get the support you need.

MORE FROM AUXBEAM

Other Product Support

Looking for help with other AUXBEAM products? Explore additional support resources below.

QUICK ACCESS

Popular Resources

Explore helpful product information, guides and support.

NEED MORE HELP?

Still Need Help?

Can't find what you're looking for? Our customer support team is ready to help.

CONTACT SUPPORT →