Making Custom Switch Labels for your Auxbeam Switch Panel

 

If you need to control an accessory for which Auxbeam doesn’t provide a switch label, making custom labels is very easy - custom labels could be created with a drawing program. DIY labels can be printed on adhesive-backed white labels from an office supply store. The labels pictured below are custom - left to right - spotlight, AC inverter power, USB outlet power, sink pump and main power for a Trail Kitchen.

Custom switch labels can be printed on white self-stick label stock, available at any office supply store. After printing the custom label on the label stock, cover the label with matte Scotch tape and then cut the label to size from the larger piece of label stock.

Once the label is protected with tape and cut to from the larger piece of label stock, it can be applied to the switch panel in the same way that the Auxbeam labels are applied.
In this next photo, the top row of labels came with the product and the bottom row labels are custom:

When the switch panel is illuminated, the custom labels are a little brighter than the Auxbeam labels. You may like the extra brightness better, but if you’d like them to be the same brightness as the Auxbeam labels you can use a double layer of the label stock too so less light passes through the custom label.