Light Sensor Wiring Harness Kit with Fuse Relay ON/Off Switch for LED Off-Road Driving Light Work Light Light Sensor Wiring Harness Kit with Fuse Relay ON/Off Switch for LED Off-Road Driving Light Work Light Auxbeam   This automatic light sensor wiring harness needs to use together with the light bar harness (for one light or two). It cannot work alone. Acc wiring length: 3 MetersConnector lug wiring length: 0.9 MetersLight sensor probe: 0.9 MeterWire Diameter: 4.2mmLight sensor value: 300LXCan be used to match wiring loom harness kit with fuse and relay.Automobile automatic induction lamps receiver head should be installed between the front windsn of the cockpit and center console connection, and make sure no any obstructions blocking the light.Automatic induction lamps control button should be installed near the driver,where the driver can easily touch. The ACC control line of the automatic sensing light shall be connected to the ACC safety sheet in the front engine compartment and the main safe box by the driving cabin,when the ACC is not connected, the automatic sensing function will not start. Instruction for Use: 1.The manual button of control box is for controlling on and off of the LED light manually. When you press the manual button, the red indicator light will be on and manual mode starts. At the same time, the green indicator light will be on and the LED light turns on.2.When you press the manual button again, the green indicator light will be off as well as the LED light.3.Under the manual mode, the red indicator light is always on.4.The automatic button of control box is for controlling on and off of the LED light automatically. When you press the automatic button, the blue indicator light will be on and automatic mode starts.5.Under the automatic mode, the light sensor will automatically turn on and turn off the LED light according to the surrounding environment. When it’s dark around, the LED light turns on automatically and green indicator light will be on. When it’s bright around, the LED light turns off and green indicator light will be off.6.The automatic system will turn on the LED light in 0.1s when it’s dark around and will turn off the LED light within 10s.7.Under the automatic mode, the blue indicator light is always on.8.Only when connecting with ACC signal wire, the automatic induction system works. Note: Please do not operate in the process of driving!Package included:1 set of car automatic light sensor wiring harness  

Light Sensor Wiring Harness Kit with Fuse Relay ON/Off Switch for LED Off-Road Driving Light Work Light

Code: 77724336
1% OFF
$11.17 $10.99
In Stock

 

This automatic light sensor wiring harness needs to use together with the light bar harness (for one light or two). It cannot work alone.

Acc wiring length: 3 Meters
Connector lug wiring length: 0.9 Meters
Light sensor probe: 0.9 Meter
Wire Diameter: 4.2mm
Light sensor value: 300LX
Can be used to match wiring loom harness kit with fuse and relay.

Automobile automatic induction lamps receiver head should be installed between the front windsn of the cockpit and center console connection, and make sure no any obstructions blocking the light.
Automatic induction lamps control button should be installed near the driver,where the driver can easily touch.

The ACC control line of the automatic sensing light shall be connected to the ACC safety sheet in the front engine compartment and the main safe box by the driving cabin,when the ACC is not connected, the automatic sensing function will not start.


Instruction for Use:
1.The manual button of control box is for controlling on and off of the LED light manually. When you press the manual button, the red indicator light will be on and manual mode starts. At the same time, the green indicator light will be on and the LED light turns on.
2.When you press the manual button again, the green indicator light will be off as well as the LED light.
3.Under the manual mode, the red indicator light is always on.
4.The automatic button of control box is for controlling on and off of the LED light automatically. When you press the automatic button, the blue indicator light will be on and automatic mode starts.
5.Under the automatic mode, the light sensor will automatically turn on and turn off the LED light according to the surrounding environment. When it’s dark around, the LED light turns on automatically and green indicator light will be on. When it’s bright around, the LED light turns off and green indicator light will be off.
6.The automatic system will turn on the LED light in 0.1s when it’s dark around and will turn off the LED light within 10s.
7.Under the automatic mode, the blue indicator light is always on.
8.Only when connecting with ACC signal wire, the automatic induction system works.


Note: Please do not operate in the process of driving!

Package included:
1 set of car automatic light sensor wiring harness

 


 

This automatic light sensor wiring harness needs to use together with the light bar harness (for one light or two). It cannot work alone.

Acc wiring length: 3 Meters
Connector lug wiring length: 0.9 Meters
Light sensor probe: 0.9 Meter
Wire Diameter: 4.2mm
Light sensor value: 300LX
Can be used to match wiring loom harness kit with fuse and relay.

Automobile automatic induction lamps receiver head should be installed between the front windsn of the cockpit and center console connection, and make sure no any obstructions blocking the light.
Automatic induction lamps control button should be installed near the driver,where the driver can easily touch.

The ACC control line of the automatic sensing light shall be connected to the ACC safety sheet in the front engine compartment and the main safe box by the driving cabin,when the ACC is not connected, the automatic sensing function will not start.


Instruction for Use:
1.The manual button of control box is for controlling on and off of the LED light manually. When you press the manual button, the red indicator light will be on and manual mode starts. At the same time, the green indicator light will be on and the LED light turns on.
2.When you press the manual button again, the green indicator light will be off as well as the LED light.
3.Under the manual mode, the red indicator light is always on.
4.The automatic button of control box is for controlling on and off of the LED light automatically. When you press the automatic button, the blue indicator light will be on and automatic mode starts.
5.Under the automatic mode, the light sensor will automatically turn on and turn off the LED light according to the surrounding environment. When it’s dark around, the LED light turns on automatically and green indicator light will be on. When it’s bright around, the LED light turns off and green indicator light will be off.
6.The automatic system will turn on the LED light in 0.1s when it’s dark around and will turn off the LED light within 10s.
7.Under the automatic mode, the blue indicator light is always on.
8.Only when connecting with ACC signal wire, the automatic induction system works.


Note: Please do not operate in the process of driving!

Package included:
1 set of car automatic light sensor wiring harness

 


International Shipping 

Auxbeam Lighting is shipping worldwide covering North and South America, Europe, Asia, Africa, Oceania and more.
We employ the services of major, trusted international carriers to ensure your package arrives at your destination safely.
U.S. domestic orders are shipped from our USA warehouse for the fastest delivery times but exceptions may occur based on stock shortage - because of which we may have to ship from China.
International orders are shipped from our China warehouse. 

Shipping Time
 
U.S. domestic shipping: about 3-5 Working Days
International shipping: about 8-15 working days
A standard processing time of up to 48 hours is required before the order is shipped out.
Due to challenges posed by the pandemic, our carrier is temporarily experiencing shipping delays, which may delay your delivery. We are always work to get your package to you as quickly and safely as possible.
 
Shipping Cost
 

We offer free shipping on all of our products to customers in the Continental U.S. when orders over $19.99. Customers in other regions need to pay additional shipping costs(Specific amount please kindly refer to your checkout page).
 
Tracking
 
Your tracking number will be sent in email immediately after we ship the order out. You may follow the link in the email to check the estimated arrival time of your order.
(Please note that tracking information will only be updated online in 1 working day after your order has been shipped.)
 
Additional Notes


If the wrong information is provided (address, phone, email) and results in your shipment being undeliverable, the customer is responsible for the shipping cost for the 2nd shipment.
We do not offer overnight shipping.
If you have any questions, please feel free to contact us via email: Customer@auxbeam.com